Advantages:
-Suitable for a wide range of transformers;
-Internal battery power supply or power adapter power supply of the instrument;
-Digital three-phase inverter power supply, easy to adjust, start, and stop the voltage
-With angle measurement function, 360 degree full angle measurement
-With high and low voltage reverse connection, output short circuit, high or low voltage protection functions
-High resolution 65K true color 7-inch touch screen, Chinese and English interface switching, clear display
-U disk storage function
-External micro printer, real-time printing data (optional)
Product Overview
The hand-held transformer ratio tester is used for measuring the turn ratio or voltage ratio of power transformers and voltage transformers, and can meet the requirements of transformer production, installation, operation, and preventive power test procedures. During the production process of semi-finished and finished products of power transformers, before the newly installed transformers are put into operation and in accordance with the preventive test regulations of the Ministry of Electric Power of the People's Republic of China, it is required to conduct a turn ratio or voltage ratio test on the operating transformers, which can check the correctness of the transformer turn ratio, the condition of the tap changer, whether the transformers have inter turn short circuits, and whether the transformers can operate in parallel. The traditional conversion ratio bridge reading is not intuitive and can only be measured phase by phase for conversion. This transformer ratio tester overcomes the shortcomings of traditional transformer ratio bridge testing, and its operation is simple and intuitive. It uses a three-phase precision inverter power supply, which is fast in testing and high in accuracy.
Feature
◆ Suitable for a wide variety of transformers, including general-purpose power transformers, Z-type transformers, rectifier transformers, grounding transformers, electric furnace transformers, shift transformers, and balance transformers.
◆ Internal battery power supply or power adapter power supply of the sampling instrument.
◆ Power supply mode: Digital three-phase inverter power supply, no harmonic content, easy to adjust voltage, start, stop.
◆ With angle measurement function, 360 ° full angle measurement.
◆ Intelligent power management mode, with remaining power display, please charge in time when it is below or near 10V.
◆ Input the rated tap position parameters once, and measure the variable ratio, error value, and current tap position at any tap position.
◆ It has protection functions such as high and low voltage reverse connection, output short circuit, high or low voltage, etc.
◆ Maximum tap position 99, maximum variable ratio 10000.
◆ High resolution 65K true color 7-inch touch screen, Chinese and English interface switching, high brightness, and clear display under strong light.
◆ No power down clock and data storage function, with USB flash disk storage function.
◆ Optional external micro printer for real-time data printing. Optional Bluetooth module.
Technical parameter
|
Test range
|
0.8~10000
|
|
Accuracy
|
±0.1%+2digit( 0.8-500)
±0.5%+2digit( 2001-10000)
±0.2%+2digit( 501-2000)
|
|
Resolution
|
0.0001
|
|
Output voltage
|
Automatic adjustment according to load
|
|
Battery
|
12.6V/5.2AH
|
|
Dimension
|
Host：252x160x65 (mm)
|
Portable case：425x335x210 (mm)
|
|
Weight
|
Host：2KG
|
Portable case：8KG
|
Environment
|
Temperature
|
-10℃~40℃
|
Humidity
|
＜90%RH，non dewing
|
Accessories
|
Sr no
|
Description
|
Qty
|
|
1
|
Test cable
|
1 set
|
|
2
|
Charging
|
1 pc
|
|
3
|
Earth wire
|
1 pc
|
|
4
|
Carrying case
|
1 pc
|
|
5
|
Calibration report
|
1 pc
|
|
6
|
Operating manual
|
1 pc
|
0.1Hz VLF AC/DC Hipot tester
